Agilent Technologies XY Operator's Manual page 41

Operation
Controlling the XY Autosampler through Agilent ChemStation
Advanced Software
The most versatile level for setting up an automation table for the
XY autosampler sequence you have in advanced mode.
Choosing Setup Automation Table under the Automate item brings you into
the automation table dialog box. You can set up an arbitrary sequence of
measurements and assign the vials you want to without any restrictions,
apart for the maximum number of 240 vials the XY autosampler can hold.
In column two, Source, you define the vial you want to analyze. Vials 1
through 60 belong to rack 1, 61 through 120 to rack 2, 121 through 180 to rack
3 and 181 through 240 to rack 4.
In column four, Action, you define the measurement that should be made. In
case of analyzing the compounds in your vial, you have the choice to select
between Measure Blank, Measure Sample, Measure Control, Measure
Standard and Measure Auxiliary.
41