Table of Contents
Advertisement
Figure 1
Vertical arm
Z-axis
horizontal arm
rack
Description and Specifications
Description
Description
The Agilent Technologies XY autosampler (G1811A) is an XYZ robot which
can automate sample handling procedures. It is controlled by Agilent
ChemStation for UV-visible spectroscopy software of revision A.06.0x or
higher. Figure 1 shows the standard configuration of the XY autosampler.
Assembled XY Autosampler
X-axis
To transfer analyte from the XY autosampler to the spectrophotometer,
tubings, a flow cell and a peristaltic pump are needed. For more details of
how to connect tubings to the XY autosampler needle, see "Connecting the
Sipper Tubing to the XY Autosampler" on page 28.
Systems including an XY autosampler controlled by a local user interface
from Gilson, Inc. are not supported by Agilent.
status light
safety shield
support bar
Y-axis
Needle
tray
9
Advertisement
Table of Contents
