Leica Aperio AT2 DX User Manual page 24

Chapter 4: Scanning Slides
As the scan proceeds, you see a green progress indicator on each slide position as the slide is being scanned.
When the scan is finished, review the scanned slide images, giving special attention to slides that show a status
color other than green.
To review scanned slides:
1.
Put your cursor over the scanned slide in rack view or batch view. You see the View Slide icon:
2. Click this icon to see the slide in the slide view
On the slide view window, you can use the tools at the bottom of the window to prepare this slide for rescanning if
necessary. (See "Using Snapshots" on page 28 for more information on using this window.)
To see the slide in even more detail, click the magnifying glass at the top corner of the green box (which indicates the
scanned area) to open the image in Aperio ImageScope DX.
To return to the previous view, click the back arrow at the top of the page.
24
window.
Aperio AT2 DX User's Guide, Revision B © Leica Biosystems Imaging, Inc. 2020