Leica Aperio AT2 DX User Manual page 59

11.
Lightning – For added protection for this scanner during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the AC wall outlet. This will prevent damage to the product due to
lightning and power line surges.
12. Power Overloading – Do not overload AC wall outlets, extension cords, or integral convenience outlets as this
can result in a fire or electric shock hazard.
13. Operating Environment – Observe these basic safety requirements:
` Do not operate the scanner out of doors.
Do not use where aerosol sprays are being used or where oxygen is being administered.
`
` Do not let the scanner or its cables or accessories come into contact with surfaces which are too hot to touch.
` Do not place anything on top of the scanner.
14.
Object and Liquid Entry – Never push objects of any kind into the scanner through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the scanner.
15. Accessories – Do not place the scanner on an unstable cart, stand, tripod, bracket, or table. The scanner may
fall, causing serious injury and damage to the product. Any mounting of the scanner needs to follow manufacturer's
installation instructions. Do not place anything on top of the scanner.
16. Moving – The scanner should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the product to overturn. Removal of the scanner may void the applicable product warranty—contact Leica
Biosystems Imaging for advice.
17.
Servicing – Refer all servicing to qualified service personnel.
18. Damage Requiring Service – Unplug the scanner from the wall AC outlet and refer servicing to qualified service
personnel under the following conditions:
When the AC cord or AC/DC adapter is damaged.
`
` If liquid has been spilled or objects have fallen into the scanner.
` If the scanner has been exposed to rain or water.
If the scanner does not operate normally (when you are following operating instructions).
`
If the scanner has been dropped or damaged in any way.
`
` When the scanner exhibits a distinct change in performance. This indicates a need for service.
19.
Replacement Parts – When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer. Unauthorized substitutions may result in fire, electric shock, or other hazards.
20.
Operational Check – Upon completion of any repairs to this scanner, ask the service technician to perform
operation checks to determine that the product is in proper operating condition.
21.
Cleaning – Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
Aperio AT2 DX User's Guide, Revision B © Leica Biosystems Imaging, Inc. 2020
Appendix C: Aperio AT2 DX Safety Instructions
59