Startup And Shutdown; System Startup; System Shutdown - Leica Aperio AT2 DX User Manual

2

System Startup

To start the Aperio AT2 DX scanner:
1. Press the power button on the front panel of the Aperio AT2 DX Control Station.
2.
When the Windows login screen appears, log in with the Windows user name and password.
The default user name and the password were provided to your administrator on installation. We recommend that
the administrator change the user name and password after installation. Contact your administrator for assistance
with the default or updated user name and password.
3.
Turn on the Aperio Image View Station monitors.
4.
Press the main power switch on the back of the scanner to the On (|) position.
The scanner takes approximately three minutes to initialize and place the stage in the home position. When the
scanner completes these processes, the status screen on the front panel of the scanner reads "Scanner Ready."

System Shutdown

To shut down the scanner:
1.
Press the main power switch on the back of the scanner to the Off (O) position.
2.
Close all scanner software applications and any additional Windows applications that are open.
3. Click the Windows Start button and select Shut Down.
4.
Select Shutdown from the window and click OK.
5.
Turn off the viewing monitors.
We advise leaving the scanner instrument powered on unless it is to be idle for more than four days.
12

Startup and Shutdown

Aperio AT2 DX User's Guide, Revision B © Leica Biosystems Imaging, Inc. 2020