SMC Networks EX260-SEN2-X205 Operation Manual page 36

•Password change
Password can be changed by selecting the Change password button.
Type the password before change in the Old password space, and the new password in the New password
and Confirm password spaces. Password change is completed by selecting OK.
<CAUTION>
•Valid character for password is half-width alphanumeric and "-", "_", "." and "@".
•Maximum number of characters for password is 16.
•Changed password must be strictly controlled.
•If the password is forgotten and needs to be reset, CIP Object Reset service command can
initialize the password.
Service
Reset
Class
ID
01 h
[Identity Object]
-35-
Inst Attr
ID ID
1 h - 01 (Type1 reset)
Values
No.EX※※-OMX1001