SMC Networks EX260-SEN2-X205 Operation Manual page 34

•Forced output mode
Procedure to change to forced output more and the method of forced output.
Warning and password input screen will appear by selecting the Force output button.
Force output space becomes active when the password entered is successful. The mode will be changed
to force output mode.
Initial password is "SMCEX260".
<CAUTION>
•Forced output is valid until selecting Reset or Force output exit.
Forced output is valid even if the network is shut down during forced output mode.
(Forced output is released when SI unit power supply is off.)
•While EtherNet/IP
TM
possible to change to forced output mode.
communication is established, the message below is shown and it is not
-33-
No.EX※※-OMX1001