Aastra 480i Administrator's Manual page 76

• On the 480i CT, the customized
labels apply to the base unit
only. On the 480i CT handset,
pressing Ï displays the default
labels of "Park" and "Pickup".
Notes:
1. On the 480i CT, the customized
labels apply to the base unit only.
On the 480i CT handset, pressing
Ï displays the default labels of
"Park" and "Pickup".
2. On the 480i/480i CT, the old
softkey labeled "Pickup" has been
renamed to "Answer". This
softkey uses the old functionality -
when you pickup the handset, you
see a softkey labeled "Answer".
You can then press this key to pick
up an incoming call. Do no
confuse this feature with the new
Park/Pickup configuration feature.
Programmable Configuration Using Config Files
In the configuration files, you configure Park/Pickup using the softkey
parameters. You must specify the"softkeyN value" and "prgkeyN value" as
<server type;server-specific value>. The following examples show Park/
Pickup configurations using specific servers.
Model 480i/480 CT Examples
Server
Asterisk softkeyN type: park
softkeyN label: parkCall
softkeyN value: asterisk;700
softkeyN line: 1
softkeyN states: connected*
Sylantro softkeyN type: park
softkeyN label: parkCall
softkeyN value: sylantro;*98
softkeyN line: 1
softkeyN states: connected*
BroadWorks softkeyN type: park
softkeyN label: parkCall
softkeyN value: broadworks;*68
softkeyN line: 1
softkeyN states: connected*
ININ PBX softkeyN type: park
softkeyN label: parkCall
softkeyN value: inin;callpark
softkeyN line: 1
softkeyN states: connected*
* When you configure a softkey as "Park", you must configure the state of the softkey as
"connected".
** When you configure a softkey as "Pickup", you can configure the state of the softkey as "idle,
outgoing", or just "idle", or just "outgoing".
68 IP Phone SIP Admin Guide
Park Configuration
On 9112i/9133i
• When a call comes in, and you
pickup the handset, you can
press the applicable "Park" pro-
grammable key to park the call.
• After the call is parked, you can
press the "Pickup" programma-
ble key, followed by the applica-
ble value to pickup the call.
You can configure a Park and
Pickup programmable
configuration using the
configuration files or the Aastra
Web UI.
Pickup Configuration
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN value: asterisk;700
softkeyN line: 1
softkeyN states: idle,outgoing**
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN value: sylantro;*99
softkeyN line: 1
softkeyN states: idle,outgoing**
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN value: broadworks;*88
softkeyN line: 1
softkeyN states: idle,outgoing**
softkeyN type: pickup
softkeyN label: pickupCall
softkeyN value: inin;pickup
softkeyN line: 1
softkeyN states: idle,outgoing**