Firmware Upgrade; Manual Firmware Update (Tftp Only) - Aastra 480i Administrator's Manual

Firmware Upgrade

The IP phone uses a TFTP, FTP, or
HTTP server (depending on the
protocol configured on the IP
phone) to download configuration
files and firmware.
The configuration server should be
ready and be able to accept
connections. For information on
setting up the configuration server,
see "Configuration Server
Requirement" on
You can download the firmware
stored on the configuration server
in one of three ways:
• Manual firmware update using
the Aastra Web UI (TFTP only).
• Manual update of firmware and
configuration files (by restarting
the phone via the IP phone UI or
the Aastra Web UI).
• Automatic update of firmware,
configuration files, or both at a
specific time in a 24-hour period
(via the configuration files or the
Aastra Web UI).
108 IP Phone SIP Admin Guide
page 2.
Manual Firmware Update
(TFTP only)
Use the following procedure to
activate a firmware download
using TFTP.
Warning: Do not reset or turn off
the phone until the download is
complete.
Aastra Web UI
(TFTP only)
Note: This procedure allows you to
download the <phone model.st>
file from a TFTP server even if
your phone is configured to use
HTTP or FTP.
1. Click on Advanced Settings-
>Firmware Update.
2. Enter the TFTP server IP
address or qualified domain
name in the "TFTP Server IP"
field.
3. Enter the firmware file name
(<phone model>.st) that you
want to download to your IP
phone in the "File Name" field.
For example, 9112i.st.
Note: This file name must match the
actual name of the firmware file
residing on your configuration
server.
4. Click
This starts the upgrade process.
If the upgrade is successful the
following message displays on
the screen:
"Firmware Upgrade Success-
ful".
.