Language - Aastra 480i Administrator's Manual

Language

Using the IP phone UI or the
configuration files, you can set the
phones to use a specific language
to display in the IP Phone UI.
When you set the language to use
on the phone, all of the display
screens (menus, services, options,
etc.) display in that language.
Valid languages for the 480i/9112i/
9133i include English, French,
Spanish, German, and Italian.
Valid languages for the 480i CT
include English, French, and
Spanish. Default language for all
model phones is English.
Configuring Language
You configure the language on the
IP phone using the Options key on
the IP phone. To configure
language using the configuration
files, enter the following
parameter:
• language: <language to set>
Use the following procedures to
configure the language for the IP
phone.
Configuration files
For specific parameters you can set
in the configuration files for setting
languages, see "Language
Settings" on page 162.
IP Phone UI
%
1. Press on the phone to
enter the Options List.
2. Select Language.
3. Select In English (English),
En francais (French), En espanol
(Spanish), In Deutsch (German),
or In italiano (Italian).
Note: Valid values for the 480i CT are
English, French, and Spanish
only.
4. On the 480i/480i CT, select
Done.
On the 9112i/9133i, select Enter
and then Set to confirm the
change.
The language you select is
immediately applied to the IP
phone UI display.
IP Phone SIP Admin Guide 101