Aastra 480i Administrator's Manual page 147

Parameter –
sip lineN display name
Caller ID
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip lineN mode
Line Mode
(in Web UI)
Description
Format
Default Value
Range
Example
Aastra Web UI Advanced Settings->Line 1 thru 9
(480i/480i CT/9133i)
Aastra Web UI Advanced Settings->Global SIP
(9112i)
Configuration Filesaastra.cfg, <mac>.cfg
Used in the display name field of the From SIP header
field. Some IP PBX systems use this as the caller's ID
and some may overwrite this with the string that is set
at the PBX system.
Text
Not Applicable
Up to 20 alphanumeric characters
sip line1 display name: Joe Smith
Aastra Web UI Advanced Settings->Line 1 thru 9
(480i/480i CT/9133i)
Aastra Web UI Advanced Settings->Global SIP
(9112i)
Configuration Filesaastra.cfg, <mac>.cfg
Allows you to configure the mode of the line.
Applicable values are:
• Generic - Normal line
• BroadSoft SCA - Shared Call/Line Appearances
(SCA) line for BroadWorks network (call activity can
go to more than one phone)
• Nortel - Conference line for Nortel Networks (pri-
vate - all call activity goes to one phone)
• BLA - Bridged Line Appearance (BLA) line.
Note: If the softkeys on the 480i/480i CT or the pro-
grammable keys on the 9133i are set as line keys,
and you configure that line key for BLA, the key
is configured to use BLA.
Integer
0
Valid values are:
0 - Generic
1 - BroadSoft SCA
2 - Nortel
3 - BLA
sip line1 mode: 2
IP Phone SIP Admin Guide 139