Call Forwarding - Aastra 480i Administrator's Manual

Pickup a Parked Call
1. Pick up the handset on the
phone.
2. Enter the extension number
where the call was parked.
3. Press the "Pickup" softkey.
If the call pick up is successful,
you are connected with the
parked call.

Call Forwarding

The call forwarding feature on the
IP phone allows incoming calls to
be forwarded to another
destination. The phone sends the
SIP message to the SIP proxy,
which then forwards the call to the
assigned destination.
Call forwarding is disabled by
default. You can configure call
forwarding on a phone-wide basis
or on multi-line phones (480i/480i
CT/9133i), on a per-line basis. If
you have configured call
forwarding on an individual line,
then the settings for this line are
used; otherwise, the phone-wide
call forward settings are used.
You can configure call forwarding
on all phones (global settings) or
on specific lines (local settings) of a
single phone.
72 IP Phone SIP Admin Guide
For call forwarding you can set the
following:
• Call forward mode
• Destination number
• Number of rings before for-
warding the call (from 1 to 9
rings)
The following are the call forward
modes you can set:
Call
Forward
Mode
Off Disables call forward
All Phone forwards all
incoming calls
immediately to the
specified destination.
Busy Phone forwards
incoming calls if the
line is already in use.
No Phone forwards the
Answer call if it is not
answered in the
specified number of
rings
Busy No Phone forwards the
Answer call if either the line is
already in use or the
call is not answered in
the specified number
of rings.
Global Phone uses the phone-
wide call forward
setting. This is only
valid when setting the
mode of individual
lines.
The following table shows the IP
phone model and the number of
lines for which you can configure
call forwarding.
IP Phone
Model
480i
480i CT
9112i
9133i
Description
Available
Lines for Call
Forwarding
9
9
1
9