Voicemail (480I/480I Ct Only) - Aastra 480i Administrator's Manual

Voicemail
(480i/480i CT only)
The Voicemail feature on the 480i/
480i CT IP phones allow you to
configure lines with phone
numbers so the phone can dial out
to connect to a voicemail server.
You associcate the Voicemail
numbers with the phone numbers
configured on each line (1 - 9 lines).
For each assigned Voicemail
number, there can be a minimum
of 0 or a maximum of 1 Voicemail
access phone number.
The Voicemail list displays a list of
phone numbers assigned to the
480i/480i CT that have registered
voicemail accounts associated with
them.
Note: The Voicemail list does not dis-
play the voicemail access num-
ber.
The phone displays up to 99
voicemails for an account even if
the number of voicemails exceeds
the limit.
Registered account numbers/URIs
that exceed the length of the
screen, either with or without the
voicemail icon and the message
count, are truncated with an ellipse
character at the end of the
number/URI string.
The end of the Voicemail list
displays the number of new
voicemail messages (if any exist).
82 IP Phone SIP Admin Guide
Configuring Voicemail
(480i/480i CT only)
You configure Voicemail in the
configuration files to dial a specific
number to access an existing
voicemail account. The user then
follows the voicemail instructions
for listening to voicemails.
Note: The phone must have a regis-
tered voicemail account from a
server for this feature to be
enabled.
When no registered voicemail
accounts are registered to the
phone, the display shows "List
Empty".
To configure the Voicemail feature
on the 480i/480i CT, you must enter
the following parameter in the
configuration files:
• sip lineN vmail:
You can enter up to 9 Voicemail
numbers associated with each of
the 9 lines on the phone.
For example:
sip line1 vmail: *97
sip line2 vmail: *95
Note: In the above example, the user
would dial *97 to access the
voicemail account for line 1, and
*95 to access the voicemail
account for line 2.
Configuration files
For specific parameters you can set
in the configuration files, see
"Voicemail Settings" on page 151.