Appendix B: Configuring The Ip Phone At The Asterisk Ip Pbx - Aastra 480i Administrator's Manual

Appendix B: Configuring the IP Phone at the Asterisk IP
PBX
The following configuration illustrates how to create a user with an
extension to make and receive calls using the Asterisk as the PBX. This
configuration is defined in the sip.conf file present along with the other
configuration files that are created when Asterisk is installed. Usually, the
configuration files can be found at the /etc/asterisk directory.
;This is used in the "extensions.conf" file to identify this
;physical phone when issuing Dial commands.
[phone1]
;The type to use for the 480i is "friend".
;"Peer" is used when the Asterisk is contacting a proxy,
;"user" is used for phones that can only make calls
;and "friend" acts as both a peer and a user.
type=friend
;If your host has an entry in your DNS then you just enter the
;machines name in the host= field.
host=dynamic
defaultip=192.168.1.1
;The password that phone1 will use to register with this PBX
secret=1234
dtmfmode=rfc2833
mailbox=1000
;If a phone is not in a valid context you will not be
;able to use it. In this example' sip' is used. You can use
;whatever you like, but make sure they are the same, you will
;need to make an entry in your extensions.conf file (which we
;will get to later)
context=sip
callerid="Phone 1" <1234>
186 IP Phone SIP Admin Guide
;default IP address that the phone is
;configured to
;Choices are inband, rfc2833, or info
;Mailbox for message waiting indicator