Aastra 480i Administrator's Manual page 41

12.Press Done to save the change.
13.Select Priority.
14.Select a VLAN Protocol (SIP,
RTP, and/or RTCP).
15.Enter a VLAN priority value
from 0 to 7 for the associated
Protocol.
16.Press Done to save the changes.
17.Press Done again to return to
the VLAN Settings menu.
To set VLAN ID and priority for
Port 1 (passthrough port):
18.Select Passthrough.
19.Select VLAN ID and enter a
value from 1 to 4094 to specify
the VLAN ID of Port 1.
20.Press Done to save the change.
21.Select Priority.
22.Select a VLAN priority value
from 0 to 7 for Port 1.
23.Press Done to save the change.
24.Press Done 3 more times to
return to the Options List main
menu.
25.Select Phone Status.
26.Select Restart Phone and press
Restart to reboot the phone for
the VLAN features to take
affect.
.
Aastra Web UI
1. Click on Advanced
Settings->Network->VLAN.
Globally enable/disable VLAN and
set priority for non-IP packets:
2. Enable VLAN by checking the
VLAN Enable field check box.
(Disable this field by uncheck-
ing the check box).
3. With VLAN enabled, select the
priority (0 to 7) for non-IP pack-
ets in the Priority, Non-IP
Packet field.
To set VLAN ID and priority for
Port 0:
4. For Port 0, enter a VLAN ID
value from 1 to 4094 in the
VLAN id field.
5. Choose a VLAN Protocol (SIP
Priority, RTP Priority, and/or
RTCP Priority), and select a pri-
ority for the associated Protocol.
To set VLAN ID and priority for
Port 1 (passthrough port):
6. For Port 1, enter a VLAN ID
value from 1 to 4094 in the
VLAN id field.
7. Select a VLAN priority value
from 0 to 7 for Port 1 in the
Priority field.
8. Click
changes.
9. Click on Operation->Reset.
10.In the "Restart Phone" field
click to restart the IP
phone.
IP Phone SIP Admin Guide
to save your
33