Softkey/Programmable Key Parameters; Softkey Settings For 480I And 480I Ct - Aastra 480i Administrator's Manual

Softkey/Programmable Key Parameters

This section provides the softkey and programmable key parameters you
can configure on the IP phones. The following table provides the number
of softkeys and programmable keys you can configure, and the number of
lines available for each type of phone.
IP Phone Softkeys
Model Available
480i
480i CT
480i CT
Handset
9112i
9133i

Softkey Settings for 480i and 480i CT

The value of "N" for the following parameters is dependent on the number
of softkeys available on the 480i/480i CT models. See the table above for
applicable values.
Parameter –
softkeyN type
Type
(in Web UI)
Description
Format
172 IP Phone SIP Admin Guide
Programmable
Keys Available
20 -
20 -
- -
- 2
- 7
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
The type of softkey to configure. Valid types are:
• line - Indicates softkey is configured for line use.
• dnd - Indicates softkey is configured for do not dis-
turb on the phone. This option is "do not disturb" in
the Aastra Web UI).
• speeddial - Indicates softkey is configured for
speeddial use
• blf - Indicates softkey is configured for Busy Lamp
Field (BLF) use. User can dial out on a BLF config-
ured key.
• list - Indicates softkey is configured for BLF list use.
(This option is BLF\List in the Aastra Web UI). User
can dial out on a BLF List configured key.
• xml - Indicates the softkey is configured to accept an
XML application for accessing customized XML ser-
vices.
• flash - Indicates the softkey is set to generate a flash
event when it is pressed on the 480i and 480i CT, or a
feature key is pressed on the 480i CT handset.
Note: The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for exam-
ple, when the call is not on hold).
• park - Indicates the softkey is configured to park
incoming calls when pressed.
• pickup - Indicates the softkey is configured to pick
up parked calls when pressed.
• empty - Indicates the softkey is configured to force a
blank entry on the IP phone display for a specific
softkey. The soft keys are added in order (from
softkey1 to softkey20) after any hard-coded keys
have been added. If a particular soft key is not
defined, it is ignored.
Text
Feature Keys
Available
-
-
15
-
-
Operation->Softkeys and XML
Available
Lines
9
9
9
1
9