Operational, Basic, And Advanced Parameters; Network Settings - Aastra 480i Administrator's Manual

Operational, Basic, and Advanced Parameters

The following sections provide the configuration parameters you can
configure on the IP phone. Each parameter table includes the name of the
parameter, a description, the format, default value, range, and example.
The table also provides the method for which the parameters can be
configured (IP phone UI, Aastra Web UI, or configuration files).

Network Settings

Parameter – dhcp
DHCP
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter – ip
Ip Address
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
subnet mask
Subnet Mask
(in Web UI)
Description
Format
Default Value
Range
Example
112 IP Phone SIP Admin Guide
IP phone UI
Aastra Web UI
Configuration Files
Enabling DHCP will populate most of the network
information. The DHCP server should serve the
network information that the IP phone requires. If the
IP phone is unable to get any required information then
it should be entered manually. Parameters affected: ip.
Use "0" to disable DHCP and "1" to enable DHCP.
Integer
1
0 or 1
dhcp: 1
IP phone UI
Aastra Web UI
Configuration Files
This parameter assigns a static IP address to the IP
phone device.
IP address
0.0.0.0
Not Applicable
ip: 192.168.0.25
IP phone UI
Aastra Web UI
Configuration Files
Subnet mask defines the IP address range local to the IP
phone.
IP address
255.255.255.0
Not Applicable
subnet mask: 255.255.255.224
Options->Network Settings
Advanced Settings->Network
aastra.cfg, <mac>.cfg
Options->Network Settings
Advanced Settings->Network
aastra.cfg, <mac>.cfg
Options->Network Settings
Advanced Settings->Network
aastra.cfg, <mac>.cfg