Making Calls; Dialing A Number; Using Handsfree Speakerphone; Using A Headset - Aastra A1720-0131-10-05 User Manual

Making Calls

This section describes ways to make
calls on your 9133i phone, using your
handset, speakerphone or headset.

Dialing a Number

First, take the phone off-hook by:
• lifting the handset
• pressing q or
• pressing a line/call appearance
button.
At the dial tone, enter the number you
wish to call. If you are unable to make
calls within certain area codes, check
with your system administrator for
any toll restrictions placed on your
extension that may restrict your access
to long distance area codes or dialing
prefixes.
When your party picks up, a timer
appears on your display that records
the length of your call.

Using Handsfree Speakerphone

The handsfree feature allows you to
speak to someone without using the
handset or headset. Your phone must
be in either the Speaker or Speaker/
Headset audio mode. You can set your
desired audio mode through #7.
Headset Settings in the Options list.
For more information, see the section
"Customizing Your Phone" in the
9133i Installation Guide.
• To dial using handsfree, first press
q and enter a number at the
dial tone.
• To answer a call on your phone
using handsfree, press q or
the line/call appearance button.
• If you are in Speaker audio mode,
Model 9133i SIP User Guide
• If you are in Speaker/headset
• When the handset is on hook, press

Using a Headset

The 9133i accepts headsets through
the modular RJ9 jack on the back of
the phone. Contact your telephone
equipment retailer or distributor to
purchase a compatible headset.
NOTE: Customers should read and
Advanced Volume Controls for the
Headset Mic
=Dial
On the 9133i, there are 3 options for
the headset microphone volume.
To change the volume:
1. Press I to enter the options
2. Use V to scroll down the list of
3. Press 7 to jump directly to this
4. Press V to scroll down to headset/
5. Use V to scroll down the list and
6. Press U to save changes and T to
7. If you do not wish to save changes,
NOTE: By default, the volume for the head-
lift the handset and press q
to switch between handsfree and
handset.
audio mode, press q to
switch between handsfree and
headset.
N to disconnect the call. When
handsfree is on, the speaker light
turns on.
observe all safety recommenda-
tions contained in headset operat-
ing guides when using any
headset.
list.
options to 7. Headset Settings and
press U to select,
or
option, and press U to select.
mic volume and press U to select.
press U to select your desired
volume.
exit.
press T to return to the previous
screen.
7