Table of Contents
Advertisement
Rear View
1
2
7
No.
Component
1
Grounding Terminal
2
Control Port
3
Local Console Port
4
PC/KVM Port
5
PON Port
6
Serial Port
7
Power Jacks
8
Console Lock Switch
3
8
9
10
The wire used to ground the unit connects here.
This port only connects to an optional control box that
requires a separate purchase.
Connect the cable for the local console (USB
keyboard, DVI monitor, USB mouse, microphone and
speakers) to this port. Each connector is color coded
and marked with an appropriate icon.
Use the KVM cable provided with this package that
links the RCM101D to your PC / Server for this port.
Connect the DVI video display, keyboard/mouse,
microphone and speakers to the server or KVM switch
that you are installing. Each connector is color coded
and marked with an appropriate icon.
Use a RJ45-to-Serial adapter (SA0142) cable to
connect this port to PN0108.
Use a RJ45-to-Serial adapter (SA0142) cable to
connect this port to another network device, such as a
modem.
Plug the power adapter provided with this package into
an AC power source, then plug the power adapter
cable into any power jack.
Plug another power adapter into an AC power source,
then plug the power cable into the other RCM101D
power jack.
Note: Dual power operation is optional – the second
power source is for back-up; a second power adapter
requires a separate purchase.
Use this switch to lock the console so that remote
access is disabled (view only) and only the local
console can operate the RCM101D.
When set to unlock, the RCM101D grants access
depending on the configuration stored.
Chapter 1. Introduction
4
Description
5
6
11
11
Advertisement
Table of Contents
