Note: None is only supported for baud rates of 9600 and lower. For baud
rates greater than 9600, you must choose Hardware or XON/XOFF.
Port Alert Properties: You can specify up to 10 types of events (e.g.,
Power On). Enter them in the provided Alert String (1 - 10) fields.
When you have finished making your selections, click Save.
Date/Time
The Date/Time dialog page sets the RCM101D time parameters:
Set the parameters according to the information below.
Time Zone
To establish the time zone that the RCM101D is located in, drop down the
Time Zone list and choose the city that most closely corresponds to where
it is at.
If your country or region employs Daylight Saving Time (Summer Time),
check the corresponding checkbox.
Chapter 4. Configuration
55