ATEN RCM101D User Manual page 89

4. If you haven't brought up the Show dialog, click Done when you have
finished recording your macro. You return to the Macros dialog box
shown in Step 1:
5. You can give each macro a set of hotkeys, as illustrated in Hotkeys,
page 69.
6. You can also assign the playback mode and select either Play Without
Wait (Nowait) or Play with Time Control.
If you run the macro from this dialog box, you have the option of specifying
how the macro runs.
 If you choose Play Without Wait, the macro runs the key presses one after
another with no time delay between them.
 If you choose Play With Time Control, the macro waits for the amount of
time between key presses that you took when you created it. Click on the
arrow next to Play to make your choice.
 If you click Play without opening the list, the macro runs with the default
choice. The default choice (NoWait or TimeCtrl), is shown in the Playback
column.
7. If you want to change any of the keystrokes, select the macro and click
Edit. This brings up a dialog box similar to the one for Show. You can
change the content of your keystrokes, change their order, etc.
8. Repeat the procedure for any other macros you wish to create.
Chapter 5. The Windows Client Viewer
73