Maintenance; Upgrade Main Firmware - ATEN RCM101D User Manual

Maintenance

The Maintenance screen allows the Administrator to upgrade the RCM101D's
firmware, view the monitor's EDID, backup/restore the RCM101D's
configuration settings and ping an IP address.

Upgrade Main Firmware

As new versions of the RCM101D firmware become available, they can be
downloaded from our website. Check the website regularly to find the latest
information and packages.
To upgrade the firmware, do the following:
1. Download the new firmware file to your computer.
2. Open your browser; log in to the RCM101D; and click Maintenance in the
left panel menu to bring up the Firmware File dialog box as follows:
3. Click Choose File; navigate to the directory that the new firmware file is
in and select the file.
4. Click the Upgrade Firmware button.
If Check Firmware Version is enabled, when you perform an upgrade the
current firmware level is compared with that of the upgrade file. If the
current version is higher than the upgrade version, a message appears
informing you of the fact and the procedure stops.
Note: If you want to install an older firmware version, you must uncheck
the Check Firmware Version checkbox before clicking Upgrade
Firmware.
Chapter 4. Configuration
27