ATEN RCM101D User Manual page 80

RCM101D User Manual
Server
Connect / Disconnect
Switch to remote view
3. When you click Connect, the system will prompt you to enter a username
and password as shown:
The default username is administrator and password is password. Click
OK to continue.
4. When you are connected, the remote server's display appears as a window
on your desktop:
64
Use this section if you wish to connect to a RCM101D at a
remote location.
Enter the IP address and the port of the unit and click
Connect.
If you don't know the Port number, contact the Administrator.
The button Connect starts the connection to the desired
RCM101D. The system will prompt you to enter a username
and password. Refer to step 3 below for more information.
Once connected, the button becomes Disconnect, which you
can use to disconnect from the unit.
When connected to the desired RCM101D, click this button to
switch to the remote view.