Table of Contents
Advertisement
RCM101D User Manual
3. In the screen that appears, press F1 to set the IP address. Proceed to step 4.
Press F2 to enable the RCM101D to authenticate users. The RCM101D
allows authentication and authorization through external programs. If the
external programs fail to authenticate and you cannot log on to the device,
use the local console to transfer authentication to the RCM101D. The
following message displays when the operation is successful.
See Authentication, page 41 for details.
Press the Esc key to exit the local console.
4. When you invoke the OSD, a screen similar to the one below appears:
To move up or down through the list one screen at a time, Click the Up and
Down Arrow symbols (), or use the [Pg Up] and [Pg Dn] keys.
To select or confirm a value, press the space bar [Space].
To dismiss the menu, and deactivate OSD, press [Esc].
112
Advertisement
Table of Contents
