Filter - ATEN RCM101D User Manual

RCM101D User Manual

Filter

IP and MAC Filters control access to the RCM101D based on the IP and/or
MAC addresses of the computers attempting to connect. A maximum of 100 IP
filters and 100 MAC filters are allowed. If any filters have been configured,
they appear in the IP Filter and/or MAC Filter list boxes.
To enable IP and/or MAC filtering, put a check mark in the IP Filter Enable
and/or MAC Filter Enable checkbox.
 If the Include button is checked, all the addresses within the filter range
are allowed access; all other addresses are denied access.
 If the Exclude button is checked, all the addresses within the filter range
are denied access; all other addresses are allowed access.
Adding Filters
To add an IP filter, do the following:
1. Click Add. Key in the IP address range you want to filter, and click OK:
2. Repeat these steps for any additional IP addresses you want to filter.
44