Rear View - ATEN CL5708IM User Manual

Rear View

1 2 3
5 6
No. Component
1 Power Socket
2 Power Switch
3 Daisy Chain Port When daisy chaining units, the cable plugs in here.
4 KVM Port
Section
5 Grounding
Terminal
6 LAN Port
7 External
Console Port
7
This is a standard 3-prong AC power socket. The power cord
from an AC source plugs in here.
This standard rocker switch powers the unit on and off.
The cables that link to the computers plug in here.
Note: The shape of these SPHD connectors has been
specifically modified so that only KVM cables designed to
work with this switch can plug in (see the Cables section on
page 7, for details). Do NOT attempt to use ordinary 15 pin
VGA connector cables to link these ports to the computers.
The grounding wire used to ground the switch attaches here.
The cable that connects the unit to the network (10/100
Mbps) plugs in here.
For flexibility and convenience, the CL5708I / CL5716I
supports an independent, external, KVM console.
The external console keyboard, monitor, and mouse cables
plug in here.
Chapter 1. Introduction
4
Description
11