Permissions - ATEN RCM101D User Manual

 Select: This allows you to manually select the access rights of the user by
selecting them in the Permissions section.

Permissions

Click to place/remove a check mark next to an item to grant/withhold access to
that aspect of the RCM101D's operation.
 Windows Client: Checking this allows a user to access the RCM101D via
the Windows Client software.
 Config: Checking this allows the user to set up and modify the
RCM101D's operating environment.
 Telnet: Checking this allows a user to access the RCM101D via the
network protocol of the same name.
 Enable Virtual Media: Checking this allows a user to utilize the
RCM101D's Virtual Media capabilities (see Virtual Media, page 83 for
details). User the drop down menu to select whether the user has Read/
Write, or Read Only permission.
 Java Client: The related function is reserved.
 System Log: Checking this allows a user to view the contents of the log
file.
 SSH Client: Checking this allows a user to access the RCM101D via SSH
sessions.
 View Only: Checking this restricts a user from configuring the
RCM101D.
 Power Management: Checking this gives a user privileges to access the
Power on the Net™ device being implemented on the RCM101D.
 Force to Grayscale: Checking this renders the remote display to be in
grayscale. This can speed up I/O transfer in low bandwidth situations.
After filling out the fields, click the action you want the RCM101D to apply:
 Reset - Click this to clear the fields.
 Add - Click this to add the new account to the RCM101D.
 Update - Click this to update the settings of an existing account.
 Remove - Click this to remove the selected account.
Chapter 4. Configuration
25