ATEN RCM101D User Manual page 100

RCM101D User Manual
2. Click Add, then select the media source.
Depending on your selection, additional dialog boxes appear enabling you
to select the drive, file, folder, or removable disk you desire. See Virtual
Media Support, page 133 for details about mounting these media types.
3. If your device only supports full speed USB, check the Disable High
Speed USB Operation Mode checkbox.
4. To add additional media sources, repeat the steps above. There is no limit
to how many media sources you can add.
The system recognizes up to three virtual media sources and the top three
in the list are the ones that are selected. Virtual Media and Smart Card
Readers (see Smart Card Reader on page 86) can be mounted at the same
time. To rearrange the selection order, highlight the device you want to
move, then click the Up or Down Arrow button to promote or demote it in
the list.
5. Read refers to the redirected device being able to send data to the remote
server; Write refers to the redirected device being able to have data from
the remote server written to it. The default is for Write to not be enabled
(Read only). If you want the redirected device to be writable as well as
readable, click to put a check in the Enable Write checkbox:
84