ATEN RCM101D User Manual page 94

RCM101D User Manual
Option
RGB
Gamma
Performance
Enhanced Text
Mode
Video Quality
Enable Refresh
Transparency
78
Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component of
the image is correspondingly increased.
If you enable Set to Grayscale, the remote video display is
changed to grayscale.
This section allows you to adjust the video display's gamma
level.
If default gamma level is not ideal, you can click the drop-down
menu for a list of preset gamma levels and select from it. There
are ten preset and four user-defined levels to choose from. To
define the user-defined levels, click the Advanced button. This
function is discussed in detail in the next section.
Select the type of internet connection that exists between the
Local Client computer and the RCM101D. The RCM101D will
use that selection to automatically adjust the Video Quality and
Detect Tolerance settings to optimize the quality of the video
display.
Since network conditions vary, if none of the pre-set choices
seem to work well, you can select Customize and use the Video
Quality and Detect Tolerance slider bars to adjust the settings
to suit your conditions.
Check this to solve video display problems related to video
screen resolution that affect some interface systems (e.g., Sun
Blade 1000 servers).
Drag the slider bar to adjust the overall Video Quality. The larger
the value, the clearer the picture and the more video data goes
through the network. Depending on the network bandwidth, a
high value may adversely effect response time.
The system can redraw the screen every 1 to 99 seconds,
eliminating unwanted artifacts from the screen. Select Enable
Refresh and enter a number from 1 through 99. The system will
redraw the screen at the interval you specify. This feature is
disabled by default. Check the checkbox next to Enable Refresh
to enable this feature.
Note: 1. The system starts counting the time interval when
mouse movement stops.
2. Enabling this feature increases the volume of video
data transmitted over the network. The lower the
number specified, the more often the video data is
transmitted. Setting too low a value may adversely
affect overall operating responsiveness.
Adjusts the transparency of the toolbar that comes up when the
GUI hotkey ([Scroll Lock][Scroll Lock], for example) is invoked.
Slide the bar until the display in the example window is to your
liking.
Usage