Machine Manual
Sentry HP/ LP Flex Stretchwrapper
System Operation
Factory Defaults Screen
Figure 3 - 27
The Factory Defaults
Screen
Table 3-23. The Factory Defaults Screen Button Descriptions
STATE 1
RESTORE FACTORY
DEFAULTS
RESTORE DEFAULT
NETWORK SETTINGS
Page 3-32
This is the Factory Defaults Screen. This screen allows authorized users to go back to the
factory default settings.
Press this button to delete the currently entered factory settings and replace them
with the original factory default settings. This will replace all Wrap Settings,
Machine Settings, and Recipes with the factory default parameters.
Press this button to restore default network settings to the machine.
DESCRIPTION
Orion
Revision 3.1
21 May 2020