Orion
Revision 3.1
21 May 2020
Fault Tracking Screen
Figure 3 - 19
The Fault Tracking
Screen
Table 3-15. The Fault Tracking Screen Button Descriptions
STATE 1
FILM BREAK
CARRIAGE OBSTACLE
DETECTED
E-STOP PRESSED
CARRIAGE GATE OPEN
LOW AIR PRESSURE
RESET
This is the Fault Tracking screen. This screen allows you to track the history of faults and
reset each counter.
This display shows the number of film breaks detected since the last counter reset.
This display shows the number of carriage obstacle detections (switch on the bot-
tom of the carriage) since the last counter reset.
This display shows the number of E-stops detected since the last counter reset.
This display shows the number of times the carriage gate open was detected since
the last counter reset.
This display shows the number of times the pneumatic pressure was low (if pneu-
matic pressure is used) since the last counter reset.
Press the reset button adjacent to the indicated counter to reset that counter to zero.
Sentry HP/ LP Flex Stretchwrapper
DESCRIPTION
Machine Manual
System Operation
Page 3-23