Machine Manual
Sentry HP/ LP Flex Stretchwrapper
System Operation
Sentry Carriage Multistretch Settings Screen
Figure 3 - 29
The Sentry Carriage
Multistretch Screen
Table 3-25. The Sentry Carriage Multistretch Screen Button Descriptions
STATE 1
TENSION HIGH SPEED %
TENSION LOW SPEED %
TENSION JOG SPEED %
TENSION MANUAL
MODE %
Page 3-34
This is the Multistretch Settings screen. This screen allows technicians to adjust the stretch
tension for the various modes of operation.
Press this numeric display to set the tension percentage applied while the machine is
running in high speed mode.
Press this numeric display to set the tension percentage applied while the machine is
running in low speed mode.
Press this numeric display to set the tension percentage applied while the machine is
jogging.
Press this numeric display to set the tension percentage applied while the machine is
in manual mode.
DESCRIPTION
Orion
Revision 3.1
21 May 2020