Table of Contents
Advertisement
Machine Manual
Sentry HP/ LP Flex Stretchwrapper
System Operation
Run Screens
Run Screen
Figure 3 - 7
The Run Screen
STATE 1
Page 3-6
The FLEX series machines are
tion, the front panel or USER settings, and MENU DRIVEN parameters. The menu driven
parameters offer even more flexibility and security.
This is the Run screen used for primary functions of the machine. The red block in the
Orion block logo will travel the perimeter of the logo showing the position of the turntable
in relation to the home proximity sensor.
Table 3-2. The Run Screen Button Descriptions
DESCRIPTION
Press and hold this button to start the machine. This must be held until the Start
Delay timer is complete to start the machine.
Press this button to pause the wrap cycle. When paused, the Carriage and Main
Drive will stop, and will wait for the Resume Cycle button to be pressed before
resuming the wrap cycle.
engineered
to give the operator different levels of opera-
Orion
Revision 3.1
21 May 2020
STATE 2
Advertisement
Table of Contents
