Machine Settings Screens; Machine Settings Screen; The Machine Settings Screen - Pro Mach ORION Sentry HP Manual

Machine Manual
Sentry HP/ LP Flex Stretchwrapper
System Operation

Machine Settings Screens

Machine Settings Screen

Figure 3 - 20
The Machine Settings
Screen
Table 3-16. The Machine Settings Screen Button Descriptions
STATE 1
MAIN DRIVE
REINFORCE
TIMERS
MACHINE SETUP
FACTORY DEFAULTS
MULTISTRETCH
VFD PARAMETERS
Page 3-24
This is the Machine Settings Screen. This screen allows access to each of the machine set-
ting adjustments.
Press this button to go to the Main Drive Screen. See "Main Drive Screen" on
page 3 - 26.
Press this button to go to the Reinforce Screen. See "Reinforce Wrap Setup" on
page 3 - 27.
Press this button to go to the Timers Screen. See "Sentry Carriage Timers Screen"
on page 3 - 28.
Press this button to go to the Machine Setup Screen. See "Orion Carriage Timers
Screen" on page 3 - 29.
Press this button to go to the Factory Defaults Screen. See "Factory Defaults
Screen" on page 3 - 32.
Press this button to go to the Multistretch Screen. See "Sentry Carriage Multistretch
Settings Screen" on page 3 - 34.
Press this button to go to the VFD Parameters Screen. See "Orion Carriage Mul-
tistretch Settings Screen" on page 3 - 35.
DESCRIPTION
Orion
Revision 3.1
21 May 2020