Table of Contents
Advertisement
Machine Manual
Sentry HP/ LP Flex Stretchwrapper
System Operation
Maintenance Prompt
Figure 3 - 8
The Maintenance
Prompt Screen
Table 3-3. The Maintenance Prompt Screen Button Descriptions
STATE 1
ACKNOWLEDGE
SNOOZE
Page 3-8
This is the Maintenance Prompt Screen. When preventative maintenance is required the
prompt and picture of the maintenance is displayed. Press Acknowledge to confirm that
the procedure was completed and reset the counter. Press Snooze to delay the counter for
100 cycles before the prompt re-displays.
Press this button to acknowledge the required maintenance prompt as completed.
Press this button to snooze the required maintenance prompt. The prompt will
remain in the alarm list and redisplay after 100 cycles and re-display until it is
acknowledged.
DESCRIPTION
Orion
Revision 3.1
21 May 2020
Advertisement
Table of Contents
