Machine Lifting Fork Tubes; Ramp Secure Bolt - Pro Mach ORION Sentry HP Manual

Machine Manual
Sentry HP/ LP Flex Stretchwrapper
Introduction and Safety
Figure 1 - 3
Machine Lifting Fork
Tubes
Figure 1 - 4

Ramp Secure Bolt

Page 1-12
3. Carefully insert the forks into the lifting tubes to the maximum possible depth. The
forktruck tine width may have to be adjusted.
4. Lift the machine only to the necessary height to move it with no bouncing or friction
on the floor.
5. Sit the machine down assuring uniform contact with the floor, which is necessary to
ensure correct and smooth operation.
6. If your machine came with the optional ramp, attach the ramp secure bolt. Next, using
a forklift lower the ramp slot over the ramp secure bolt.
Orion
Revision 3.1
21 May 2020