Intended Use - Dentsply Sirona CEREC AF Operating Instructions Manual

3 General description

3.2 Intended use

10
Intended use
3.2
In combination with the milling unit, the CEREC AF / CEREC AI /
CEREC AF Connect / CEREC AI Connect / CEREC AI for Rear unit is
used to manufacture dental restorations, e.g. from a natural-appearing
ceramic material. The unit may be operated only by medically trained
and qualified personnel.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
Dentsply Sirona
Operating Instructions (valid for Canada)
66 37 487 D3652
D3652.201.01.21.02 03.2021