Configuring An Auxiliary Control Unit; Adding A Auxiliary Control Unit With A Cisco Telepresence Presentation Codec; Cisco Telepresence Presentation Codec; Parts List For Presentation Codec - Cisco TelePresence System Series Hardware Upgrade Manual
Hide thumbs
Also See for TelePresence System Series:
- User manual (51 pages) ,
- Quick reference manual (2 pages) ,
- Getting started manual (41 pages)
Table of Contents
Advertisement
Cisco TelePresence Presentation Codec
Configuring an Auxiliary Control Unit
To configure your auxiliary control unit with your Cisco TelePresence system, refer to
Cisco TelePresence System Administrator's Guide
Adding a Auxiliary Control Unit with a Cisco TelePresence Presentation Codec
To add an auxiliary control unit to a Cisco TelePresence system with a presentation codec, complete the
steps in the
additional cabling steps:
•
•
The Ethernet ports in the auxiliary control unit are interchangeable. Use either of the ports for the
Note
connections from the primary codec and the presentation codec.
Cisco TelePresence Presentation Codec
The Cisco TelePresence Presentation Codec (CTS-HFR-COLLAB) provides 30 frames per second
capabilities to support full-motion video presentations between Cisco TelePresence endpoints.
This section contains the steps you use to install the Cisco TelePresence Presentation codec and includes
the following topics.
•
•
•
•
Parts List for Presentation Codec
Key
Part Description
Presentation Codec, 800-28202-xx
1
Secondary (Presentation) codec
2
Double-wide tray for presentation codec
3
Left bracket for presentation codec (CTS 3000
and CTS 32 only)
4
Right bracket for presentation codec
Cisco TelePresence System
6-6
"Adding an Auxiliary Control Unit" section on page 6-3
Connect the Primary Codec Document Camera Ethernet connection (orange Ethernet connection on
the primary codec) to one Ethernet port of the auxiliary control unit.
Connect the other Ethernet port of the auxiliary control unit to the Presentation Codec Ethernet port
(white/red Ethernet connection on the presentation codec).
Parts List for Presentation Codec, page 6-6
Adding a Cisco TelePresence Presentation Codec—Cisco TelePresence System 3000 and 3200,
page 6-7
Adding a Cisco TelePresence Presentation Codec—Cisco TelePresence System 3010 and 3210,
page 6-19
Configuring a Cisco TelePresence Presentation Codec, page 6-24
Chapter 6
Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
for your software release.
Part Number
Qty
800-28202-xx
1
700-25301-01
1
700-25306-01
1
700-27374-01
1
and complete the following
Notes
OL-16441-01
Advertisement
Table of Contents
