Cisco TelePresence System Series Hardware Upgrade Manual page 11

Chapter 1 Options for the Cisco TelePresence System 500 32"
Step 2 Make the following changes to the codec connections:
a.
b.
Figure 1-2 Codec Connections
Audio In
Audio Out
Speaker
Line-out
Audio Output
PC Audio
Auxiliary PC Audio
Microphone
(Table Microphone
is not supported)
OL-16441-01
Remove the HD video cable from the connection labeled "Auxiliary PC Video" in
Insert the HD video cable into the connection labeled "Auxiliary Input (ex. DMP)" in
Microphone &
Main Camera
Control
Auxiliary PC Video
PC Video
Component Input
Connect to Display Stand I/O Panel
Connect to Display (Prewired)
Optional
Not in Use for CTS 500 32"
Video In
Main Camera Video
Document Camera
Auxiliary Input (ex.DMP)
Cisco Digital Media Player
Video Out &
Network, Control, Power
To Document Camera
To Phone
To Network
Main Camera Power
Main Display Video
Auto Collaborate
Display Video
Cisco TelePresence System
Figure 1-2.
Figure 1-2.
Power
1-3