Options For The Cisco Telepresence System; Cisco Digital Media Player - Cisco TelePresence System Series Hardware Upgrade Manual

Options for the Cisco TelePresence System

500-37
Revised: October 15, 2009, OL-16441-01
This chapter contains the procedures you perform to configure the hardware options for the
Cisco TelePresence System 500-37 and includes the following sections:
•
•

Cisco Digital Media Player

The Cisco Digital Media Player (DMP) is a highly reliable, IP-based hardware endpoint that enables
digital signage and Enterprise TV through the ability to play high-definition live and on-demand video,
motion graphics, Web, and dynamic content on digital displays.
For more information about the DMP, refer to this URL:
http://www.cisco.com/en/US/products/ps7220/tsd_products_support_series_home.html
To configure the DMP audio for use with Cisco TelePresence, refer to the
Fixture and Configuring the Digital Media Player Audio"
the
You can use DMPs with the Cisco Digital Media System (DMS). For more information about the DMS,
refer to this URL:
http://www.cisco.com/en/US/products/ps6681/products_documentation_roadmaps_list.html
The DMS uses Digital Media Manager (DMM) software. For more information about DMM software
and DMM appliances, refer to this URL:
http://www.cisco.com/en/US/products/ps6681/tsd_products_support_series_home.html
To connect the DMP to the CTS 500, complete the following procedure
OL-16441-01
Cisco Digital Media Player, page 2-1
Cisco TelePresence Presentation Codec, page 2-4
Cisco TelePresence System 500 Assembly, Use & Care, and Field Replaceable Unit
2
C H A P T E R
"Testing the LEDs and Light
section of the "First-Time Setup"
Cisco TelePresence System
chapter of
Guide.
2-1