Cisco TelePresence System Series Hardware Upgrade Manual page 56

Cisco TelePresence Presentation Codec
Step 7 Log in to the Cisco TelePresence Administration GUI by opening a browser on a computer that is
connected to the network, then typing in the IP address of the primary codec unit into the browser
address bar.
Enter the required information at the login screen.
Step 8
The Cisco TelePresence Administrator window appears.
Step 9 Verify that the status of the Cisco Unified Communications Manager (seen in the lower left portion of
the window) is Enabled/Up.
Select Hardware Setup to verify that the cameras, displays, speakers, and microphones are working
Step 10
properly.
Navigate to the Device Information > Configuration > CUCM settings window, then perform the
Step 11
following actions:
In the Certificate Trust List (CTL) area, delete the Certificate Trust List (CTL) from your system by
Step 12
clicking Delete CTL.
In the Use Configuration TFTP Server area, click Automatic to set TFTP conditions to their default
Step 13
value and remove any alternate TFTP servers.
Note If you encounter problems, you might have to reboot your presentation codec several times before
Note
it becomes active. To reboot the presentation codec, turn off and on the PDU where you plugged in the
presentation codec.
Configure your presentation codec with your CTS-3000 by completing the following steps.
Step 14
a.
b.
c.
d.
e.
Figure 4-6 Presentation Codec Check Box
Note
f.
Cisco TelePresence System
4-10
Log in to the Cisco Unified Communications Manager web GUI.
Navigate to Device > Phone.
Find the Cisco Unified IP Phone that controls your Cisco TelePresence system by clicking Find.
Click the hypertext link next to the phone that controls your Cisco TelePresence System to select it.
In the Optional Hardware area, click the Presentation Codec check box.
The options that display in this area might differ from what you see in your system.
Click Save, then, click Apply Config to apply the configuration to your system.
Chapter 4 Options for the Cisco TelePresence System 1100
OL-16441-01