Cisco TelePresence System Series Hardware Upgrade Manual page 122

Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
Upgrading a CTS 3000 to a CTS 3200
Step 17 Place the section 1 and section 2 tabletops on the table assembly, insert the plastic spline in the slot of
table section 1, and join the tables together, then insert and tighten the draw bolts evenly on each side
until the tabletop sections are joined together.
Figure 6-42 Tabletop Sections 1 and 2, Spline And Draw Bolts
14
15
40
39
57
As you build the table tops, attempt to align the table feet with the table tops, and make sure that they
Note
table tops are supported on at least three sides.
Cisco TelePresence System
6-56
OL-16441-01