Connecting A Pc To The Unit; Use As Pc Screen; Setting The Screen Esolution; Using An External Monitor To Show Presentations - Cisco TelePresence System EX90 User Manual

Cisco TelePresence System EX90
Calling another (optional feature)

Connecting a PC to the unit

Your EX90 has an HD display, which also may serve as your PC screen. Connect
your PC to the sockets on the rear panel as shown below. For optimal PC image
quality, digital output (DVI) from the PC is recommended. If both DVI and HDMI are
connected, a Source button appears in the setup menu on the touch screen to let
you select which source to use as PC screen.
Connect your PC video to

Use as PC screen

Your EX90 has an HD display, which also may serve as your PC screen. Connect
your PC to the sockets on the rear panel as shown above.
Your EX90 will serve as your PC screen outside calls. In a call tap View desktop to
see the desktop.
Your desktop is not exposed to the other side.
User guide EX90, November 2010.
D14724.03
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
 
 
and PC audio to
Calling another (optional feature)

Setting the screen esolution

A resolution of 1920 × 1200 is recommended. However, other resolutions may also
be used as shown in the below tables.
Digital input via DVI
1920 × 1200 (recommended)
1920 × 1080
1776 × 1000 (not full screen)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1400 × 1050 (not full screen)
1280 × 1024 (not full screen)
1280 × 960 (not full screen)
1280 × 800
1280 × 768 (not full screen)
1280 × 720 (not full screen)
1152 × 648 (not full screen)
1024 × 768 (not full screen)
960 × 600 (not full screen)
800 × 600 (not full screen)
Screen resolution must be set via the web interface, using the Video Output
HDMI [1] Resolution setting. For details on this, see the EX90 Administrator
Guide, which is available separately for download.

Using an external monitor to show presentations

You may connect an external monitor to your EX90 to have it work with two
monitors at the same time. The second monitor can be configured to show
presentations instead of having everything on a single screen.
To enable the use of a second monitor the system must be configured for it. This
is done via the web interface using the Video DefaultPresentationSource
setting. Doing so is described in the EX90 Administrator Guide which is available
separately for download .
8
User guide
Analog input via DVI
1
920 × 1200 (recommended)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1280 × 1024 (not full screen)
1024 × 768 (not full screen)
800 × 600 (not full screen)
www.cisco.com