Cisco TelePresence System Series Hardware Upgrade Manual page 81

Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
Step 9 Route the signal cables for the presentation codec using one of the following diagrams:
•
Figure 6-12 Cable Routing for Presentation Codec and Auxiliary Control Unit
Projector
Serial Video In
Presentation Codec
Signal
Auxiliary Video In
Center Left Right
Speaker First Row
Center Microphone
OL-16441-01
For a standard Cisco TelePresence system installation, use the following wiring diagram for the
presentation codec.
Video out
Audio Expansion
Unit
Left Codec
Right Codec
Camera
Auxiliary
network
port Document Camera
IP Phone
Network
Cisco TelePresence Presentation Codec
Auxiliary Control Unit
1 2
SERI AL PORTS RESET
Serial 2
Serial 1
Ethernet 1
Ethernet 2
Primary Codec
Auxiliary Video In
Display
Auxiliary Video Out
Cisco TelePresence System
1 2
10/ 100 NETW ORK PORTS
6-15