Adding The Optional Switch; Video Signal Splitter - Cisco TelePresence System Series Hardware Upgrade Manual

Video Signal Splitter

Adding the Optional Switch

To add the optional switch, perform the following procedure:
Install the switch and switch bracket on the right accessory cabinet.
Step 1
Figure 6-20 Switch and Switch Bracket
Step 2 Route the cables for the switch. You use six ports for the first row of tables, and 12 ports for the second
row of tables.
Video Signal Splitter
The following video signal splitters have been tested for use with Cisco TelePresence systems:
Using External Devices with Your Cisco TelePresence System—Cisco cannot guarantee the
Note
performance of any external device, so Cisco recommends that you choose good quality external devices
to optimize performance of the Cisco TelePresence system.
The Cisco TelePresence System works best when you attach suitable devices using good quality cables
and connectors. Cisco does not supply the cable that connects auxiliary devices to the codec.
Cisco TelePresence System
6-26
Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
2
3
1
3
4
OL-16441-01