Options For The Cisco Telepresence System 1000; Auxiliary Control Unit; Parts List For Auxiliary Control Unit; Options For The Cisco Telepresence System 1300 - Cisco TelePresence System Series Hardware Upgrade Manual

Options for the Cisco TelePresence System 1000

Revised: October 15, 2009, OL-16441-01
This chapter provides you with installation instructions for the options for the Cisco TelePresence
System 1000 and includes the following sections:
•
•

Auxiliary Control Unit

The auxiliary control unit provides the ability to conserve energy by powering the Cisco TelePresence
System 1000 (CTS 1000) lights on and off. There is one power inlet, five controlled power outlets, and
one power outlet that is not controlled (unswitched). In addition, there are two serial ports and an
incoming and outgoing Ethernet connection that allows you to control peripheral items. The auxiliary
control unit is controlled by your CTS 1000 Administrator and can be configured to:
•
•
•

Parts List for Auxiliary Control Unit

Key Part Description
Audio/Video Expansion Unit, CTS-LIGHT-CTRL, 69-1989-01
1
Auxiliary Control Unit
2 Bracket for auxiliary control unit
3 Cat6 Ethernet Cable, 3M
4
Cat6 Ethernet Cable, 1M
5
Serial Cable, 6M
6 Cable Tie
7 Cable Holder, 1 inch x 1 inch
OL-16441-01
Auxiliary Control Unit, page 3-1
Cisco TelePresence Presentation Codec, page 3-5
Turn the CTS 1000 lights on during a Cisco TelePresence call and turn the lights off after the call
completes, or to stay on for a period of time after a call completes.
Turn the CTS 1000 lights on according to a configured time schedule.
Leave the CTS 1000 lights on continuously.
C H A P T E R
Part Number Qty
69-1989-01 1
700-27073-01 2
37-0887-02 2
37-0901-01 2
37-0980-01 1
51-4641-01 25
51-4712-01 25
3
Notes
Cisco TelePresence System
3-1