Cisco TelePresence System Series Hardware Upgrade Manual page 100

Upgrading a CTS 3000 to a CTS 3200
Step 3 Carefully unscrew the lenses from the camera assembly.
Figure 6-22 Removing Lenses from The Camera Assembly
Attach the new lenses to the camera assembly. Tighten until the lenses are seated and finger-tight but do
Step 4
not overtighten.
Re-attach the camera hood and lens hood.
Step 5
Cisco TelePresence System
6-34
Chapter 6 Options for the Cisco TelePresence System 3000, 3010, 3200, and 3210
OL-16441-01