Cisco TelePresence System Series Hardware Upgrade Manual page 25

Chapter 2 Options for the Cisco TelePresence System 500-37
Step 15 Attach the top cover to the presentation codec assembly and route the cables through the hole in the rear
center of the cover.
The hole for the cables is not visible in
Note
If your installation does not have enough space behind the codec to route the cables through the hole in
Tip
the top cover, route the cables through either the left or right end cap.
Tighten the screws until they are snug but do not overtighten.
Note
Figure 2-10 Top Cover
10
OL-16441-01
10
Figure 2-10; it faces the rear of the codec.
Cisco TelePresence Presentation Codec
6
Cisco TelePresence System
2-13