Cisco TelePresence System Series Hardware Upgrade Manual page 35

Chapter 3 Options for the Cisco TelePresence System 1000
h.
i.
Step 11 Remove the presentation codec from its packaging.
Remove the right handle/mounting bracket from the presentation codec.
Step 12
Figure 3-3 Removing the Right Handle/Mounting Bracket
8
Place the codec and base so that the cables can reach the CTS 1000 codec.
Note
OL-16441-01
Click the Restart Cisco TelePresence System button to start the reset.
The monitor goes dark and, the encircled numbers one through six appear at the bottom of the
display screen on the left-hand side.
After the first number changes to a check mark, unplug the system power cord from the wall socket.
8
2
1
Cisco TelePresence Presentation Codec
Cisco TelePresence System
3-7