Cisco TelePresence System Series Hardware Upgrade Manual page 18

Cisco TelePresence Presentation Codec
h.
i.
Step 7 Remove the presentation codec from its packaging.
Remove the right handle/mounting bracket from the presentation codec.
Step 8
Figure 2-3 Removing the Right Handle/Mounting Bracket
8
Place the codec and base so that the cables can reach the CTS 500 codec.
Note
Cisco TelePresence System
2-6
Click the Restart Cisco TelePresence System button to start the reset.
The monitor goes dark and, the encircled numbers one through six appear at the bottom of the
display screen on the left-hand side.
After the first number changes to a check mark, unplug the system power cord from the wall socket.
8
Chapter 2 Options for the Cisco TelePresence System 500-37
2
1
OL-16441-01